Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's subtle, doesn't have keys or LEDs and is concealed within the wiring of the vehicle.
It also allows users to temporarily disable the system by using Transport Mode for when they are renting their vehicle. This guide will take you through the installation of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle against key cloning, hacking and relay attacks. The system is connected directly to the ECU of your vehicle and secured by a PIN code you set. It is undetectable by thieves using diagnostic scanners and other modern methods. It cannot be disabled with circuit cuts.
The system is easy to use, however it is essential to have a professional installation to ensure a smooth and secure connection with your vehicle's ECU. Installers who are approved by Thatcham can assist you with the installation and programing of your Ghost system. They can also recommend a tracking system or alarm to complete your vehicle's protection package.
First, the installer needs to disconnect the battery to prevent the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer may start working safely. Basic hand tools are useful to make precise connections and a multimeter can be used to verify electrical values and ensure safety. Cable tie and insulation tape are crucial to ensure connections are secure and keep wiring tidy. In addition, the user's manual offers specific instructions specifically tailored to the Ghost Immobiliser model you have.
It is essential to choose a grounding location that is free of dirt or paint during installation. The installer should be sure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. Based on the model, these wires may require soldering or plugged into. To ensure a stable and durable connection, it is recommended that you use a high-quality plug.
After the installation is completed After the installation is complete, the customer can turn on Transport Mode. This allows valet parking or mechanics to access the vehicle without knowing the pin code. To accomplish this, the customer has to hit the button for service on the dashboard 5 times in the space of two seconds. Once this is done, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great option for those who rent out their vehicles often through platforms like Turo. Immobilisers can also lower insurance costs since it reduces the likelihood of theft.
Getting Started
It's not difficult to come up with an autowatch ignition device if you want to protect your car from thieves. It protects your vehicle from being started even the theft or copies the key. This is due to its sophisticated technology, which is designed to stop the car's engine from starting unless the correct PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle and allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and steering wheel to create a unique sequence that only you know, making it impossible for anyone else to start your car. ghost immobilisers thekeylab.co.uk is the best security system to protect your pride and joy and will ensure its value should you decide to sell it in the future.
Installing Ghost's immobiliser is straightforward however, you must follow the directions to avoid electrical problems and system malfunctions. You'll need to locate a 12V power supply and a solid grounding on the car's chassis. After that, you can begin to connect the wires for the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a solid connection. Insulate the connections using heat shrink tubing or insulation tape, or other materials to prevent electrical short circuits.
Once the wires are connected, you can reconnect the battery and start the engine to test the immobiliser's functionality. If everything is functioning properly, you can install it in a safe location under the dash or elsewhere in the vehicle. Be sure to hide it well to ensure that thieves cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it is in compliance with the highest standards of security and is an excellent protection against car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without a code. The device is simple to use and can be set up to the service valet setting to ensure that your vehicle won't be activated when you take it for an MOT or service.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to prevent vehicle theft. It connects directly to the vehicle's CAN bus and communicates with the ECU, making it virtually undetectable as an addition to your car. Ghost Immobiliser doesn't interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals and instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one button) and turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and leave with peace of mind.
Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning and will also protect the value of your car's pride and joy. If you ever have to hand over your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll have to locate an energy source that is constant (12V) and an earthing point. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested for bundling and secure the wires. This reduces the risk of theft by potential thieves. To avoid making mistakes, make sure to double-check these points and mark them using the use of tape or labels. It's important to inspect every connection for signs of wear and tear. Loose connections can lead to malfunctions in the system, so make sure they're securely fixed and well-insulated. Also, don't forget test the Ghost Immobiliser after the installation is completed. This will ensure that the unit functions properly and that all connections are safe and well-insulated. If there are any issues, make sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your vehicle's ECU to stop unauthorised motor starting. The innovative technology protects your vehicle from hacking and key cloning and other methods employed by thieves to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to provide the ultimate vehicle protection. The Ghost's unparalleled features and subtle design make it a preferred option for car enthusiasts and security-conscious drivers too.
It is essential to follow the procedures for installation to ensure the correct integration of the Ghost Immobiliser. The best place to start is to consult the vehicle's wiring diagram that will serve as a guideline for locating and connecting the wires required. You'll then need to identify the grounding and power sources. Once these are found you'll need to mark them so that they are easy to locate when installing. It's essential to use high-quality materials and tools. Hand tools are a must with making precise connections and a multimeter can confirm electrical values and guarantee security. Cable ties and insulation tape will help keep all connections neat and tidy. A Ghost-specific user manual is also available.
Before beginning the installation, it's important to test the system by entering the PIN code and starting the vehicle. This step will confirm that the immobiliser works in the way it was intended, preventing unauthorized vehicle start-ups. This procedure should be carried out frequently as part of your regular inspections of your vehicle to ensure the system is working properly.
After the installation is completed, you can drive your car with confidence. The Ghost will keep your pride and joy secure from thieves who might steal it and ensure that no one can escape with your car without the correct PIN code. The Ghost can also be paired with a Thatcham-approved tracker to detect any attempts at tampering or theft and allow you to track your vehicle if it is stolen.
The Ghost can be used in a variety of vehicles and is compatible with most major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA Registered installer which guarantees that we adhere to the strictest standards and procedures for installing our products. This assures insurance companies, customers and law enforcement officials that all installations are completed safely and in a correct manner.